7 Crucial Bond Cleaning Tasks


7 Crucial Bond Cleaning Tasks

By : Melissa Collison
Moving is an overwhelming task as you are burdened with a whole of responsibilities at the same time. Obviously, cleaning is the last thing that you want to do before leaving. However, if you want to get back the bond, you will have to make the effort and clean the rental property.

However, most people are not aware of the crucial bond cleaning tasks that can cost you your deposit. That is why they usually hire professional bond cleaners in Wollongong with experience, knowledge and appropriate cleaning tools to do the job efficiently.

In case, you want to do it on your own, read about the seven crucial bond cleaning tasks that will help you to clean the property thoroughly and get back the security deposit.

1. Oven Cleaning

Oven cleaning is one of the critical cleaning tasks when it comes to bond cleaning. People often ignore this cleaning task and find it difficult to complete at the end of lease. The food particles and spills burn inside the oven, and over time, they turn into stubborn stains.

In most of the final inspections, landlords/property managers observe the ovens very carefully. So if you want to get the bond money back without any deduction, you need to clean the oven properly. You can either use commercial oven cleaners or natural cleaning agents like baking soda and white vinegar to get rid of the dirt and stains.

Apart from the oven, also clean the kitchen countertops, cabinets, drawers and sink. Make sure there are no cooking oil and grease marks on any kitchen surface.

2. Toilet And Bathtub Cleaning

Your bathroom is another important place that requires deep cleaning. Substandard cleaning of this area can lead to a dispute with your landlord. While cleaning the bathroom, pay more attention to the toilet, bathtub, and sink.

Make sure there are no hard water stains and dirt. White vinegar, baking soda, body wash, etc. are some effective cleaning agents that can be used to make your bathroom sparkling clean.

People often hire experienced bond cleaners in Wollongong as they have the required technical knowledge and modern cleaning tools. If there is bad odour or dampness inside the bathroom, open the windows for proper ventilation.

3. Cleaning of Light Fixtures and Fittings

Cleaning of light fixtures and fittings is also crucial for bond cleaning. People often neglect this area during the cleaning process but regret during the inspection. If you don’t want any deduction in your security deposit, do not forget to clean the light fixtures and fittings of the rental property.

Prepare a cleaning paste using baking soda and lemon. Apply it on the affected area and scrub it properly and then wipe it off with a dry cloth. Sparkling clean light fixtures and fittings are most likely to impress your landlord.

4. Carpet Cleaning

The cleaning of carpets is one of the major factors for dispute between tenants and landlords. If you want to avoid that, make sure the carpets are properly clean. To get rid of the pet hair, use baking soda.

Sprinkle it properly on the carpet and leave it for at least one day. It not only loosens the grip of the hair from the carpets but also removes the bad odour. Then use a vacuum cleaner to get rid of the pet hair. Apart from the pet hair, red wine and coffee stains are also difficult to remove.

Use a carpet cleaner to remove such stains but before using one, read the instructions properly. Repeat the cleaning process if the stains are still visible. If you still don’t get the result you want, contact professional bond cleaners in Wollongong.

5. Window Cleaning

Cleaning the windows is not as difficult as you think – all you need to do is follow the right cleaning methods. Mix one part of distilled white vinegar and one part of hot water properly. Then take a cleaning sponge and apply it on the windows.

Scrub it properly and then rinse it. Sparkling clean windows can grab attention immediately, so your property manager is most likely to get impressed. And that will increase your chance of getting back the bond. But make sure that before cleaning the window with the solution, you have removed the dirt on the surface using a microfiber cloth.

6. Wall Cleaning

This is one of the most crucial tasks in bond cleaning. It is essential to remove the scuffs, pencil marks, furniture marks and fingerprints from the walls to get back the security deposit. While magic eraser can be an effective option to get rid of the marks, you might need advice from Wollongong bond cleaners to clean your wall properly.

If there are any food stains, mix liquid soap in a cup of warm water and apply it on the affected area with a piece of cloth. Rinse the area with clean water, and if the stains are not visible, use a dry towel to remove the excess moisture from the surface.

7. Outdoor Cleaning

Many people neglect the exterior cleaning at the end of the lease, but it is an essential part of the bond cleaning in Wollongong. Once you are done with the interior of the house, clean the patio, including all the furniture.

Also remove the dust or cobwebs from window sills, walls and eaves. Do not forget to cut the lawn grass and sweep the paths. Always remember that outdoor cleaning should be up to the mark because it will be the first thing that your landlord/ property manager will notice.


Bond cleaning doesn’t have to be difficult and time-consuming if you prepare a plan before you start with your cleaning. Follow a cleaning checklist and include all the crucial cleaning tasks mentioned above to avoid any errors. And you will find that all your cleaning has been completed before time and in a hassle-free manner.